User Manual

General Instrument Setup
R&S
®
FPL1000
522User Manual 1178.3370.02 ─ 09
Clear History
Deletes the list of previously selected service functions.
Password
Most service functions require a special password as they may disrupt normal opera-
tion of the R&S FPL1000. There are different levels of service functions, depending on
how restrictive their use is handled. Each service level has a different password.
"Reset Password" clears any previously entered password and returns to the most
restrictive service level.
Remote command:
SYSTem:PASSword[:CENable] on page 977
SYSTem:PASSword:RESet on page 977
Clear Results
Clears the result display for all previously performed service functions.
Remote command:
DIAGnostic:SERVice:SFUNction:RESults:DELete on page 976
Save Results
Opens a file selection dialog box to save the results of all previously performed service
functions to a file.
Remote command:
DIAGnostic:SERVice:SFUNction:RESults:SAVE on page 976
Result List
The Results List indicates the status and results of the executed service functions.
9.6 Toolbar Configuration
If the list of available icons becomes longer than the height of the screen, an arrow at
the bottom of the toolbar indicates that further icons are available.
However, you can configure which icons are displayed in the toolbar, and in which
order.
Toolbar configuration is saved when you shut down or preset the R&S FPL1000. It is
not included in save sets (see Chapter 8.2, "Storing and Recalling Instrument Settings
and Measurement Data", on page 457).
To configure the toolbar
1. From the toolbar, select "More icons" > "Edit Toolbar".
The toolbar is highlighted red to indicate it is in edit mode.
2. Drag and drop the icons in the toolbar to the required position. A blue line indicates
the selected position.
Toolbar Configuration