User Manual

Network and Remote Operation
R&S
®
FPL1000
587User Manual 1178.3370.02 ─ 09
Current LXI Configuration........................................................................................... 587
LXI Password..............................................................................................................587
LXI Manufacturer Description......................................................................................588
LAN Reset...................................................................................................................588
Current LXI Configuration
Displays the current LXI information from the R&S FPL1000 (read-only).
"Current ver-
sion"
Current LXI version
"LXI Extended
Features"
Detected LXI features, such as HiSlip (see "HiSLIP Protocol"
on page 542)
"Computer
name"
Name of the R&S FPL1000 as defined in the operating system (see
also "Computer Name" on page 580)
"MAC address"
Media Access Control address (MAC address), a unique identifier for
the network card in the R&S FPL1000
"IP address"
IP address of the R&S FPL1000 as defined in the operating system
(see also "IP Address" on page 581).
"ICMP"
Indicates whether the ping responder is active or not
"VXI-11 Dis-
covery"
If enabled, connected devices are detected automatically using the
VXI-11 protocol (see "VXI-11 Protocol" on page 542)
Remote command:
SYSTem:LXI:INFO on page 970
LXI Password
Password for LAN configuration. The default password is LxiWebIfc.
Network and Remote Control Settings