User Manual

Network and Remote Operation
R&S
®
FPL1000
588User Manual 1178.3370.02 ─ 09
Remote command:
SYSTem:LXI:PASSword on page 971
LXI Manufacturer Description
Instrument description of the R&S FPL1000
Remote command:
SYSTem:LXI:MDEScription on page 971
LAN Reset
Resets the LAN configuration to its default settings (LCI function).
According to the LXI standard, an LCI must set the following parameters to a default
state.
Parameter Value
TCP/IP Mode DHCP + Auto IP Address
Dynamic DNS Enabled
ICMP Ping Enabled
Password for LAN configuration LxiWebIfc
The LAN settings are configured in the "Network" tab of the "Network + Remote" dialog
box or using the instrument's LXI Browser interface.
Remote command:
SYSTem:LXI:LANReset on page 971
10.3.5 Remote Errors
Access: [SETUP] > "Network + Remote" > "Remote Errors " tab
The error messages generated by the R&S FPL1000 during remote operation are dis-
played here.
The messages are displayed in the order of their occurrence; the most recent mes-
sages are placed at the top of the list.
Network and Remote Control Settings