User Manual

Network and Remote Operation
R&S
®
FPL1000
604User Manual 1178.3370.02 ─ 09
10.4.7.1 How to Configure the R&S FPL1000 for Remote Operation via Remote Desktop
1. Create a fixed IP address for the TCP/IP protocol as described in Chapter 10.4.1.2,
"How to Assign the IP Address", on page 592.
Note: To avoid problems, use a fixed IP address.
When a DHCP server is used, a new IP address is assigned each time the instru-
ment is restarted. This address must first be determined on the instrument itself.
Thus, using a DHCP server is not suitable for remote operation of the
R&S FPL1000 via Remote Desktop.
2.
Select the "Windows" icon in the toolbar to access the operating system.
3. In the Windows "Start" menu, select "Settings > System".
4. Search for "remote access".
5. Select "Allow remote access to your computer".
6. Define which users are to be given access to the R&S FPL1000 via Remote Desk-
top.
Note: The user account under which configuration is carried out is automatically
enabled for Remote Desktop.
a) Select the "Select Users" button.
How to Set Up a Network and Remote Control