User Manual

Remote Commands
R&S
®
FPL1000
642User Manual 1178.3370.02 ─ 09
Suffix:
<ch>
.
1..n
Tx channel number
Parameters:
<Bandwidth> Range: 100 Hz to 1000 MHz
*RST: 14 kHz
Default unit: Hz
Manual operation: See "Channel Bandwidth" on page 139
See "Channel Bandwidth" on page 152
See "Channel Bandwidth" on page 157
[SENSe:]POWer:ACHannel:NAME:ACHannel <Name>
This command defines a name for the adjacent channel.
Parameters:
<Name> String containing the name of the channel
*RST: ADJ
Manual operation: See "Channel Names" on page 141
[SENSe:]POWer:ACHannel:NAME:ALTernate<ch> <Name>
This command defines a name for an alternate channel.
Suffix:
<ch>
.
1..n
Alternate channel number
Parameters:
<Name> String containing the name of the channel
*RST: ALT<1...11>
Manual operation: See "Channel Names" on page 141
[SENSe:]POWer:ACHannel:NAME:CHANnel<ch> <Name>
This command defines a name for a transmission channel.
Suffix:
<ch>
.
1..n
Tx channel number
Parameters:
<Name> String containing the name of the channel
*RST: TX<1...12>
Manual operation: See "Channel Names" on page 141
[SENSe:]POWer:ACHannel:SPACing[:ACHannel] <Spacing>
This command defines the distance from transmission channel to adjacent channel.
Configuring and Performing Measurements