User Manual

Remote Commands
R&S
®
FPL1000
643User Manual 1178.3370.02 ─ 09
Parameters:
<Spacing> Range: 100 Hz to 2000 MHz
*RST: 14 kHz
Default unit: Hz
Manual operation: See "Channel Spacings" on page 139
[SENSe:]POWer:ACHannel:SPACing:ALTernate<ch> <Spacing>
This command defines the distance from transmission channel to alternate channels.
If you set the channel spacing for the first alternate channel, the R&S FPL1000 adjusts
the spacing of alternate channels of a lower order, but not the other way round. The
command works hierarchically: to set a distance from the transmission channel to the
2nd and 3rd alternate channel, you have to define a spacing for the 2nd alternate
channel first.
Suffix:
<ch>
.
1..n
Alternate channel number
Parameters:
<Spacing> Range: 100 Hz to 2000 MHz
*RST: 40 kHz (ALT1), 60 kHz (ALT2), 80 kHz (ALT3), ...
Default unit: Hz
Manual operation: See "Channel Spacings" on page 139
[SENSe:]POWer:ACHannel:SPACing:CHANnel<ch> <Spacing>
This command defines the distance between transmission channels.
If you set the channel spacing for a transmission channel, the R&S FPL1000 sets the
spacing of the lower transmission channels to the same value, but not the other way
round. The command works hierarchically: to set a distance between the 2nd and 3rd
and 3rd and 4th channel, you have to set the spacing between the 2nd and 3rd chan-
nel first.
Suffix:
<ch>
.
1..n
Tx channel number
Parameters:
<Spacing> Range: 14 kHz to 2000 MHz
*RST: 20 kHz
Default unit: Hz
Manual operation: See "Channel Spacings" on page 139
[SENSe:]POWer:ACHannel:TXCHannel:COUNt <Number>
This command defines the number of transmission channels.
The command works for measurements in the frequency domain.
Configuring and Performing Measurements