User Manual

Remote Commands
R&S
®
FPL1000
645User Manual 1178.3370.02 ─ 09
[SENSe:]POWer:ACHannel:FILTer:ALPHa:CHANnel<ch> <Alpha>
This command defines the roll-off factor for the transmission channel weighting filter.
Suffix:
<ch>
.
1..n
Tx channel number
Parameters:
<Alpha> Roll-off factor
Range: 0 to 1
*RST: 0.22
Manual operation: See "Weighting Filters" on page 141
[SENSe:]POWer:ACHannel:FILTer[:STATe]:ACHannel
<State>
This command turns the weighting filter for the adjacent channel on and off.
Parameters:
<State> ON | OFF | 1 | 0
*RST: 0
Manual operation: See "Weighting Filters" on page 141
[SENSe:]POWer:ACHannel:FILTer[:STATe][:ALL] <State>
This command turns the weighting filters for all channels on and off.
Parameters:
<State> ON | OFF | 1 | 0
*RST: 0
[SENSe:]POWer:ACHannel:FILTer[:STATe]:ALTernate<ch> <State>
This command turns the weighting filter for an alternate channel on and off.
Suffix:
<ch>
.
1..n
Alternate channel number
Parameters:
<State> ON | OFF | 1 | 0
*RST: 0
Manual operation: See "Weighting Filters" on page 141
[SENSe:]POWer:ACHannel:FILTer[:STATe]:CHANnel<ch> <State>
This command turns the weighting filter for a transmission channel on and off.
Suffix:
<ch>
.
1..n
Tx channel number
Configuring and Performing Measurements