User Manual

Remote Commands
R&S
®
FPL1000
653User Manual 1178.3370.02 ─ 09
11.6.4.7 Retrieving and Analyzing Measurement Results
The following commands retrieve and analyze measurement results for ACLR mea-
surements.
Useful commands for channel power measurements described elsewhere
●
CALCulate<n>:MARKer<m>:FUNCtion:POWer<sb>:RESult? on page 630
●
TRACe<n>[:DATA] on page 832
●
CALCulate<n>:LIMit<li>:ACPower:ACHannel:RESult? on page 648
●
CALCulate<n>:LIMit<li>:ACPower:ALTernate<ch>:RESult?
on page 651
Remote commands exclusive to channel power measurements
CALCulate<n>:MARKer<m>:FUNCtion:POWer<sb>:RESult:PHZ....................................... 653
[SENSe:]POWer:ACHannel:MODE..................................................................................653
CALCulate<n>:MARKer<m>:FUNCtion:POWer<sb>:RESult:PHZ <State>
This command selects the way the R&S FPL1000 returns results for power measure-
ments.
You can query results with CALCulate<n>:MARKer<m>:FUNCtion:POWer<sb>:
RESult?.
Suffix:
<n>
.
Window
<m> Marker
<sb> irrelevant
Parameters:
<State> ON | OFF | 1 | 0
ON | 1
Channel power density in dBm/Hz
OFF | 0
Channel power in dBm
*RST: 0
Example:
CALC:MARK:FUNC:POW:RES:PHZ ON
Output of results referred to the channel bandwidth.
Manual operation: See "Channel power level and density (Power Unit)"
on page 137
[SENSe:]POWer:ACHannel:MODE <Mode>
This command selects the way the R&S FPL1000 displays the power of adjacent chan-
nels.
Configuring and Performing Measurements