User Manual

Remote Commands
R&S
®
FPL1000
703User Manual 1178.3370.02 ─ 09
Parameters:
<Probability> Range: 0 % to 100 %
Default unit: %
Example:
CALC1:MARK:Y:PERC 95PCT
Positions marker 1 to a probability of 95 %.
Manual operation: See "Percent Marker (CCDF only)" on page 217
CALCulate<n>:STATistics:NSAMples <Samples>
This command defines the number of samples included in the analysis of statistical
measurement functions.
Suffix:
<n>
.
Window
Parameters:
<Samples> Range: Min: 100, Max: depends on the RBW filter
*RST: 100000
Example:
CALC:STAT:NSAM 500
Sets the number of measurement points to be acquired to 500.
Manual operation: See "Number of Samples" on page 218
11.6.9.3 Using Gate Ranges for Statistical Measurements
The following commands control gated statistical measurements.
[SENSe:]SWEep:EGATe:TRACe<t>:COMMent................................................................. 703
[SENSe:]SWEep:EGATe:TRACe<t>:PERiod.....................................................................703
[SENSe:]SWEep:EGATe:TRACe<t>:STARt<gr>................................................................704
[SENSe:]SWEep:EGATe:TRACe<t>[:STATe<gr>].............................................................. 704
[SENSe:]SWEep:EGATe:TRACe<t>:STOP<gr>................................................................ 705
[SENSe:]SWEep:EGATe:TRACe<t>:COMMent <Comment>
This command defines a comment for the gate of a particular trace.
Suffix:
<t>
.
Trace
Parameters:
<Comment> String containing the comment.
Example:
SWE:EGAT:TRAC1:COMM 'MyComment'
Defines a comment for the gate in trace 1.
Manual operation: See "Comment" on page 219
[SENSe:]SWEep:EGATe:TRACe<t>:PERiod <Length>
This command defines the length of the gate for all traces.
Configuring and Performing Measurements