User Manual

Remote Commands
R&S
®
FPL1000
708User Manual 1178.3370.02 ─ 09
CALCulate<n>:STATistics:SCALe:Y:UPPer <Magnitude>
This command defines the upper vertical limit of the diagram.
Suffix:
<n>
.
Window
Parameters:
<Magnitude> The number is a statistical value and therefore dimensionless.
Range: 1E-5 to 1.0
*RST: 1.0
Example:
CALC:STAT:SCAL:Y:UPP 0.01
Manual operation: See "Y-Max/ Y-Min" on page 221
11.6.9.5
Performing a Statistical Measurement
The following commands are required to perform a statistical measurement:
INITiate<n>[:IMMediate] on page 629, see Chapter 11.6.1, "Performing Mea-
surements", on page 626
11.6.9.6 Retrieving Results
The following commands are required to retrieve the measurement results.
Useful commands for retrieving results described elsewhere:
●
CALCulate<n>:MARKer<m>:X on page 845
Remote commands exclusive to statistical results
CALCulate<n>:STATistics:CCDF:X<t>?............................................................................708
CALCulate<n>:STATistics:RESult<res>?.......................................................................... 709
CALCulate<n>:STATistics:CCDF:X<t>? <Probability>
This command queries the results of the CCDF.
Suffix:
<n>
.
Window
<t> Trace
Query parameters:
<Probability> P0_01
Level value for 0.01 % probability
P0_1
Level value for 0.1 % probability
P1
P1: Level value for 1 % probability
P10
Level value for 10 % probability
Configuring and Performing Measurements