User Manual

Remote Commands
R&S
®
FPL1000
731User Manual 1178.3370.02 ─ 09
Suffix:
<n>
.
Window
<m> Marker
Parameters:
<Detector> OFF
no final measurement is performed
AVER
average detector
CAV
CISPR Average detector
CRMS
RMS Average detector
POS
maximum peak detector
QPE
quasipeak detector
*RST:
OFF
Manual operation: See "Final Test Detector" on page 264
11.6.14.3 Configuring the EMI Final Test
The commands required to configure the EMI final test are described here.
Useful commands for configuring EMI final tests described elsewhere:
●
[SENSe:]BANDwidth[:RESolution]:TYPE on page 770
●
[SENSe:]BANDwidth[:RESolution] on page 769
Remote commands exclusive to configuring EMI final tests
CALCulate<n>:MARKer<m>:FUNCtion:FMEasurement:PEAKsearch:AUTO........................ 731
CALCulate<n>:DELTamarker<m>:FUNCtion:FMEasurement:PSEarch:AUTO...................... 731
CALCulate<n>:MARKer<m>:FUNCtion:FMEasurement:PSEarch:AUTO..............................731
CALCulate<n>:DELTamarker<m>:FUNCtion:FMEasurement:PEAKsearch:AUTO.................731
CALCulate<n>:DELTamarker<m>:FUNCtion:FMEasurement:DWELl...................................732
CALCulate<n>:MARKer<m>:FUNCtion:FMEasurement:DWELl.......................................... 732
CALCulate<n>:MARKer<m>:FUNCtion:FMEasurement:PEAKsearch:AUTO
<State>
CALCulate<n>:DELTamarker<m>:FUNCtion:FMEasurement:PSEarch:AUTO
<State>
CALCulate<n>:MARKer<m>:FUNCtion:FMEasurement:PSEarch:AUTO <State>
CALCulate<n>:DELTamarker<m>:FUNCtion:FMEasurement:PEAKsearch:AUTO
<State>
Suffix:
<n>
.
1..n
<m> 1..n
Configuring and Performing Measurements