User Manual

Remote Commands
R&S
®
FPL1000
733User Manual 1178.3370.02 ─ 09
Example: //Turn on high pass filter
INP:LISN:TYPE ENV216
INP:LISN:FILT:HPAS ON
Manual operation: See "150 kHz Highpass" on page 269
INPut<ip>:LISN:PHASe <Phase>
This command selects one LISN phase to be measured.
Suffix:
<ip>
.
1 | 2
irrelevant
Parameters:
<Phase> L1
L2
Available for networks with four phases (R&S ESH2Z5,
R&S ENV4200 and R&S ENV432)
L3
Available for networks with four phases (R&S ESH2Z5,
R&S ENV4200 and R&S ENV432)
N
*RST: L1
Example: //Select phase L1
INP:LISN:PHAS L1
Manual operation: See "Phase" on page 269
INPut<ip>:LISN[:TYPE] <Type>
This command turns automatic control of a LISN on and off. It also selects the type of
network.
Suffix:
<ip>
.
1 | 2
irrelevant
Parameters:
<Type> ENV216
R&S ENV 216: two phases and highpass are controllable.
ENV432
R&S ENV 432: four phases are controllable.
ENV4200
R&S ENV 4200: four phases are controllable.
ESH2Z5
R&S ESH2-Z5: four phases (incl. protective earth) are controlla-
ble.
Configuring and Performing Measurements