User Manual

Remote Commands
R&S
®
FPL1000
734User Manual 1178.3370.02 ─ 09
ESH3Z5
R&S ESH3-Z5: two phases (incl. protective earth) are controlla-
ble.
FOURphase
R&S ESH2-Z5: four phases (incl. protective earth) are controlla-
ble.
OFF
Turns off remote control of the LISN.
TWOPhase
R&S ESH3-Z5: two phases (incl. protective earth) are controlla-
ble.
*RST:
OFF
Example: //Select LISN
INP:LISN:TYPE TWOP
Manual operation: See "LISN Type" on page 269
11.6.14.6 Retrieving EMI Results
The commands required to retrieve EMI measurement results are described here.
Useful commands for retrieving EMI measurement results described elsewhere:
●
CALCulate<n>:MARKer<m>:X on page 845
CALCulate<n>:DELTamarker<m>:X on page 843
●
CALCulate<n>:MARKer<m>:Y on page 858
CALCulate<n>:DELTamarker<m>:Y on page 858
Remote commands exclusive to retrieving EMI measurement results
CALCulate<n>:DELTamarker<m>:FUNCtion:FMEasurement:RESult?................................. 734
CALCulate<n>:MARKer<m>:FUNCtion:FMEasurement:RESult?........................................ 734
CALCulate<n>:DELTamarker<m>:FUNCtion:FMEasurement:LIMit<li>:LCONdition?............. 735
CALCulate<n>:MARKer<m>:FUNCtion:FMEasurement:LIMit<li>:LCONdition?.....................735
CALCulate<n>:DELTamarker<m>:FUNCtion:FMEasurement:LIMit<li>:LDELta?................... 735
CALCulate<n>:MARKer<m>:FUNCtion:FMEasurement:LIMit<li>:LDELta?...........................735
CALCulate<n>:DELTamarker<m>:FUNCtion:FMEasurement:RESult? <Result>
CALCulate<n>:MARKer<m>:FUNCtion:FMEasurement:RESult? <Result>
This command queries the result of the EMI measurement at the marker position.
Suffix:
<n>
.
Window
<m> Marker
Return values:
<Result> Power level. The unit depends on the one you have currently
set.
Configuring and Performing Measurements