User Manual

Remote Commands
R&S
®
FPL1000
798User Manual 1178.3370.02 ─ 09
[SENSe:]PMETer<p>:ROFFset[:STATe] <State>
This command includes or excludes the reference level offset of the analyzer for power
sensor measurements.
Suffix:
<p>
.
Power sensor index
Parameters:
<State> ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
Example:
PMET2:ROFF OFF
Takes no offset into account for the measured power.
Manual operation: See "Use Ref Level Offset" on page 280
[SENSe:]PMETer<p>:SOFFset <SensorOffset>
Takes the specified offset into account for the measured power. Only available if
[SENSe:]PMETer<p>:ROFFset[:STATe] is disabled.
Suffix:
<p>
.
Power sensor index
Parameters:
<SensorOffset> Default unit: DB
Example:
PMET2:TRIG:SOFF 0.001
Manual operation: See "Sensor Level Offset" on page 281
[SENSe:]PMETer<p>[:STATe] <State>
This command turns a power sensor on and off.
Suffix:
<p>
.
Power sensor index
Parameters:
<State> ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
Example:
PMET1 ON
Switches the power sensor measurements on.
Manual operation: See "State" on page 278
See "Select" on page 279
Setting Basic Spectrum RF Measurement Parameters