User Manual

Applications, Measurement Channels, and Result Displays
R&S
®
FPL1000
80User Manual 1178.3370.02 ─ 09
Spectrum.......................................................................................................................80
I/Q Analyzer.................................................................................................................. 80
Analog Demod.............................................................................................................. 80
Noise Figure..................................................................................................................80
Vector Signal Analysis (VSA)........................................................................................ 80
Spectrum
In the "Spectrum" application the provided functions correspond to those of a conven-
tional spectrum analyzer. The analyzer measures the frequency spectrum of the RF
input signal over the selected frequency range with the selected resolution and sweep
time. Alternatively, it displays the waveform of the video signal for a fixed frequency.
This is the default application of the spectrum analyzer.
Remote command:
INST:SEL SAN, see INSTrument[:SELect] on page 622
I/Q Analyzer
The I/Q Analyzer application provides measurement and display functions for I/Q data.
Remote command:
INST:SEL IQ, see INSTrument[:SELect] on page 622
Analog Demod
The Analog Demodulation application provides measurement functions for demodulat-
ing AM, FM, or PM signals.
This application requires the optional firmware R&S FPL1-K7 to be installed.
For details see the Analog Demodulation Mode User Manual.
Remote command:
INST:SEL ADEM, see INSTrument[:SELect] on page 622
Noise Figure
The Noise Figure application provides noise figure measurements.
This application requires the optional firmware R&S FPL1-K30 to be installed.
For details see the Noise Figure Measurements User Manual.
Remote command:
INST:SEL NOISE, see INSTrument[:SELect] on page 622
Vector Signal Analysis (VSA)
The VSA application requires an instrument equipped with the Vector Signal Analysis
option, R&S FPL1-K70. This application provides measurements and evaluations for
single-carrier digitally modulated signals.
For details see the R&S FPL1-K70 User Manual.
Remote command:
INST:SEL DDEM, see INSTrument[:SELect] on page 622
Available Applications