User Manual

Remote Commands
R&S
®
FPL1000
817User Manual 1178.3370.02 ─ 09
Suffix:
<n>
.
Window
<w> subwindow
<t> Trace
Parameters:
<State> ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
Example:
DISP:WIND:TRAC3:MODE:HCON ON
Switches off the reset function.
Manual operation: See "Hold" on page 395
DISPlay[:WINDow<n>][:SUBWindow<w>]:TRACe<t>[:STATe] <State>
This command turns a trace on and off.
The measurement continues in the background.
Suffix:
<n>
.
Window
<w> subwindow
Not supported by all applications
<t> Trace
Parameters:
<State> ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
Example:
DISP:TRAC3 ON
Manual operation: See "Trace 1/Trace 2/Trace 3/Trace 4/Trace 5/Trace 6"
on page 393
See "Trace 1/ Trace 2/ Trace 3/ Trace 4 (Softkeys)" on page 397
DISPlay[:WINDow<n>][:SUBWindow<w>]:TRACe<t>:SMOothing:APERture
<Aperture>
This command defines the degree (aperture) of the trace smoothing, if DISPlay[:
WINDow<n>][:SUBWindow<w>]:TRACe<t>:SMOothing[:STATe]TRUE.
Suffix:
<n>
.
Window
Setting Basic Spectrum RF Measurement Parameters