User Manual

Remote Commands
R&S
®
FPL1000
827User Manual 1178.3370.02 ─ 09
Suffix:
<n>
.
1..n
Window
Parameters:
<State> ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
Example: //Activates the time stamp
CALC:SGR:TST ON
Manual operation: See "Time Stamp" on page 409
Configuring the Color Map
DISPlay[:WINDow<n>]:SGRam:COLor:DEFault................................................................827
DISPlay[:WINDow<n>]:SPECtrogram:COLor:DEFault........................................................827
DISPlay[:WINDow<n>]:SGRam:COLor:LOWer..................................................................827
DISPlay[:WINDow<n>]:SPECtrogram:COLor:LOWer.........................................................827
DISPlay[:WINDow<n>]:SGRam:COLor:SHAPe................................................................. 828
DISPlay[:WINDow<n>]:SPECtrogram:COLor:SHAPe.........................................................828
DISPlay[:WINDow<n>]:SGRam:COLor:UPPer.................................................................. 828
DISPlay[:WINDow<n>]:SPECtrogram:COLor:UPPer..........................................................828
DISPlay[:WINDow<n>]:SGRam:COLor[:STYLe]................................................................828
DISPlay[:WINDow<n>]:SPECtrogram:COLor[:STYLe]........................................................828
DISPlay[:WINDow<n>]:SGRam:COLor:DEFault
DISPlay[:WINDow<n>]:SPECtrogram:COLor:DEFault
This command restores the original color map.
Suffix:
<n>
.
Window
Manual operation: See "Set to Default" on page 412
DISPlay[:WINDow<n>]:SGRam:COLor:LOWer <Percentage>
DISPlay[:WINDow<n>]:SPECtrogram:COLor:LOWer <Percentage>
This command defines the starting point of the color map.
Suffix:
<n>
.
Window
Parameters:
<Percentage> Statistical frequency percentage.
Range: 0 to 66
*RST: 0
Default unit: %
Setting Basic Spectrum RF Measurement Parameters