User Manual

ManualsBrandsRohde & Schwarz ManualsSignal Generators & Spectrum AnalysersSpectrum Analyser Portable, 3GHz, 50Ohm

831

832

833

834

835

836

837

838

839

840

Remote Commands

R&S

FPL1000

831User Manual 1178.3370.02 ─ 09

<t> irrelevant

Parameters:

<State> ON | OFF | 0 | 1

OFF | 0

Switches the function off

ON | 1

Switches the function on

Example:

CALC:MATH:STAT ON

Turns on trace mathematics.

Manual operation: See "Trace Math Function" on page 417

See "Trace Math Off" on page 417

11.8.7.4

Retrieving Trace Results

This chapter describes how to retrieve data from standard traces.

For spectrograms see also Chapter 11.8.8.6, "Marker Search (Spectrograms)",

on page 858.

For details on the format of the retrieved trace data see also Chapter 11.8.7.5, "For-

mats for Returned Values: ASCII Format and Binary Format", on page 834.

Commands required to export traces (and other result data) are described in Chap-

ter 11.9.5, "Storing Measurement Results", on page 941.

FORMat[:DATA]............................................................................................................. 831

TRACe<n>[:DATA]......................................................................................................... 832

TRACe<n>[:DATA]:MEMory?.......................................................................................... 833

TRACe<n>[:DATA]:X?.................................................................................................... 834

FORMat[:DATA] <Format>[, <BitLength>]

This command selects the data format that is used for transmission of trace data from

the R&S FPL1000 to the controlling computer.

Note that the command has no effect for data that you send to the R&S FPL1000. The

R&S FPL1000 automatically recognizes the data it receives, regardless of the format.

For details on data formats see Chapter 11.8.7.5, "Formats for Returned Values: ASCII

Format and Binary Format", on page 834.

Parameters:

<Format> ASCii | REAL | UINT | MATLab

ASCii

ASCii format, separated by commas.

This format is almost always suitable, regardless of the actual

data format. However, the data is not as compact as other for-

mats may be.

Setting Basic Spectrum RF Measurement Parameters