User Manual

Remote Commands
R&S
®
FPL1000
836User Manual 1178.3370.02 ─ 09
*RST: SINGle
Manual operation: See "Export all Traces and all Table Results" on page 447
FORMat:DIMPort:TRACes <Selection>
This command selects the data to be included in a data import file (see MMEMory:
LOAD<n>:TRACe on page 836).
For details on importing data see Chapter 7.13.3, "How to Import Traces",
on page 450.
Parameters:
<Selection> SINGle | ALL
SINGle
Only a single trace is selected for import, namely the one speci-
fied by the MMEMory:LOAD<n>:TRACe on page 836 com-
mand.
ALL
Imports several traces at once, overwriting the existing trace
data for any active trace in the result display with the same trace
number. Data from the import file for currently not active traces
is not imported.
The <trace> parameter for the MMEMory:LOAD<n>:TRACe
on page 836 command is ignored.
*RST:
SINGle
Manual operation: See "Import All Traces/Import to Trace" on page 449
See "Import ASCII File to Trace" on page 449
MMEMory:LOAD<n>:TRACe <Trace>, <FileName>
This command imports trace data from the specified window to an ASCII file.
Suffix:
<n>
.
Window
Parameters:
<Trace> Number of the trace to be stored
(This parameter is ignored for FORMat:DIMPort:TRACes
on page 836ALL).
<FileName> String containing the path and name of the import file.
MMEMory:STORe<n>:TRACe <Trace>, <FileName>
This command exports trace data from the specified window to an ASCII file.
For details on the file format see Chapter 7.13.6, "Reference: ASCII File Export For-
mat", on page 451.
Suffix:
<n>
.
Window
Setting Basic Spectrum RF Measurement Parameters