User Manual

ManualsBrandsRohde & Schwarz ManualsSignal Generators & Spectrum AnalysersSpectrum Analyser Portable, 3GHz, 50Ohm

831

832

833

834

835

836

837

838

839

840

Remote Commands

R&S

FPL1000

840User Manual 1178.3370.02 ─ 09

● n dB Down Marker................................................................................................ 881

● Signal Count Marker............................................................................................. 884

● Marker Demodulation............................................................................................886

● Programming Examples for Using Markers and Marker Functions.......................889

11.8.8.1 Setting Up Individual Markers

The following commands define the position of markers in the diagram.

CALCulate<n>:DELTamarker<m>:AOFF...........................................................................840

CALCulate<n>:DELTamarker<m>:LINK............................................................................840

CALCulate<n>:DELTamarker<ms>:LINK:TO:MARKer<md>................................................841

CALCulate<n>:DELTamarker<m>:MODE......................................................................... 841

CALCulate<n>:DELTamarker<m>:MREFerence................................................................ 842

CALCulate<n>:DELTamarker<m>[:STATe]........................................................................ 842

CALCulate<n>:DELTamarker<m>:TRACe.........................................................................842

CALCulate<n>:DELTamarker<m>:X................................................................................. 843

CALCulate<n>:MARKer<m>:AOFF..................................................................................843

CALCulate<n>:MARKer<ms>:LINK:TO:MARKer<md>.......................................................844

CALCulate<n>:MARKer<m>[:STATe]............................................................................... 844

CALCulate<n>:MARKer<m>:TRACe................................................................................844

CALCulate<n>:MARKer<m>:X........................................................................................ 845

CALCulate<n>:DELTamarker<m>:AOFF

This command turns off all delta markers.

Suffix:

<n>

Window

<m> irrelevant

Example:

CALC:DELT:AOFF

Turns off all delta markers.

CALCulate<n>:DELTamarker<m>:LINK <State>

This command links delta marker <m> to marker 1.

If you change the horizontal position (x-value) of marker 1, delta marker <m> changes

its horizontal position to the same value.

Tip: to link any marker to a different marker than marker 1, use the CALCulate<n>:

DELTamarker<ms>:LINK:TO:MARKer<md> or CALCulate<n>:MARKer<ms>:

LINK:TO:MARKer<md> commands.

Suffix:

<n>

Window

<m> Marker

Parameters:

<State> ON | OFF | 0 | 1

Setting Basic Spectrum RF Measurement Parameters