User Manual

Remote Commands
R&S
®
FPL1000
848User Manual 1178.3370.02 ─ 09
Application/Result display Unit
Spectrum dB
Suffix:
<n>
.
irrelevant
<m> irrelevant
Parameters:
<Excursion> The excursion is the distance to a trace maximum that must be
attained before a new maximum is recognized, or the distance to
a trace minimum that must be attained before a new minimum is
recognized
*RST: 6 dB in the Spectrum application and RF displays
Default unit: DB
Example:
CALC:MARK:PEXC 10dB
Defines peak excursion as 10 dB.
Manual operation: See "Peak Excursion" on page 356
CALCulate<n>:MARKer<m>:X:SLIMits[:STATe] <State>
This command turns marker search limits on and off for all markers in all windows.
If you perform a measurement in the time domain, this command limits the range of the
trace to be analyzed.
Suffix:
<n>
.
irrelevant
<m> irrelevant
Parameters:
<State> ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
Example:
CALC:MARK:X:SLIM ON
Switches on search limitation.
Manual operation: See "Search Limits (Left / Right)" on page 157
See "Deactivating All Search Limits" on page 157
See "Limit State" on page 229
CALCulate<n>:MARKer<m>:X:SLIMits:LEFT <SearchLimit>
This command defines the left limit of the marker search range for all markers in all
windows.
Setting Basic Spectrum RF Measurement Parameters