User Manual

ManualsBrandsRohde & Schwarz ManualsSignal Generators & Spectrum AnalysersSpectrum Analyser Portable, 3GHz, 50Ohm

851

852

853

854

855

856

857

858

859

860

Remote Commands

R&S

FPL1000

851User Manual 1178.3370.02 ─ 09

ON | 1

Switches the function on

Example:

CALC:THR:STAT ON

Switches on the threshold line.

Manual operation: See "Deactivating All Search Limits" on page 157

11.8.8.4 Positioning the Marker

This chapter contains remote commands necessary to position the marker on a trace.

● Positioning Normal Markers .................................................................................851

● Positioning Delta Markers..................................................................................... 854

Positioning Normal Markers

The following commands position markers on the trace.

CALCulate<n>:MARKer<m>:MAXimum:AUTO..................................................................851

CALCulate<n>:MARKer<m>:MAXimum:LEFT...................................................................852

CALCulate<n>:MARKer<m>:MAXimum:NEXT..................................................................852

CALCulate<n>:MARKer<m>:MAXimum[:PEAK]................................................................ 852

CALCulate<n>:MARKer<m>:MAXimum:RIGHt..................................................................852

CALCulate<n>:MARKer<m>:MINimum:AUTO...................................................................853

CALCulate<n>:MARKer<m>:MINimum:LEFT....................................................................853

CALCulate<n>:MARKer<m>:MINimum:NEXT................................................................... 853

CALCulate<n>:MARKer<m>:MINimum[:PEAK]................................................................. 854

CALCulate<n>:MARKer<m>:MINimum:RIGHt...................................................................854

CALCulate<n>:MARKer<m>:MAXimum:AUTO <State>

This command turns an automatic marker peak search for a trace maximum on and

off. The R&S FPL1000 performs the peak search after each sweep.

Suffix:

<n>

Window

<m> Marker

Parameters:

<State> ON | OFF | 0 | 1

OFF | 0

Switches the function off

ON | 1

Switches the function on

Example:

CALC:MARK:MAX:AUTO ON

Activates the automatic peak search function for marker 1 at the

end of each particular sweep.

Manual operation: See "Auto Max Peak Search / Auto Min Peak Search"

on page 356

Setting Basic Spectrum RF Measurement Parameters