User Manual

Remote Commands
R&S
®
FPL1000
857User Manual 1178.3370.02 ─ 09
In the spectrogram, the command moves a marker horizontally to the minimum level in
the currently selected frame. The vertical marker position remains the same.
Suffix:
<n>
.
Window
<m> Marker
Manual operation: See "Search Next Minimum" on page 362
11.8.8.5 Retrieving Marker Results
The following commands are used to retrieve the results of markers.
You can use the marker values to position the center frequency or reference level
directly using the following commands:
●
CALCulate<n>:MARKer<m>:FUNCtion:CENTer on page 759
●
CALCulate<n>:MARKer<m>:FUNCtion:REFerence on page 776
Useful commands for retrieving results described elsewhere:
●
CALCulate<n>:DELTamarker<m>:X on page 843
●
CALCulate<n>:MARKer<m>:X on page 845
●
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:COUNt? on page 871
●
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:X? on page 873
●
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:Y? on page 873
●
CALCulate<n>:MARKer<m>:FUNCtion:NOISe:RESult? on page 874
●
CALCulate<n>:DELTamarker<m>:FUNCtion:PNOise:RESult?
on page 875
●
CALCulate<n>:DELTamarker<m>:FUNCtion:BPOWer:RESult?
on page 880
●
CALCulate<n>:MARKer<m>:FUNCtion:BPOWer:RESult? on page 878
●
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:RESult? on page 883
●
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:FREQuency? on page 882
●
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:QFACtor? on page 883
●
CALCulate<n>:MARKer<m>:COUNt:FREQuency? on page 885
Remote commands exclusive to retrieving marker results
CALCulate<n>:DELTamarker<m>:X:RELative?................................................................. 857
CALCulate<n>:DELTamarker<m>:Y................................................................................. 858
CALCulate<n>:MARKer<m>:Y........................................................................................ 858
CALCulate<n>:DELTamarker<m>:X:RELative?
This command queries the relative position of a delta marker on the x-axis.
Setting Basic Spectrum RF Measurement Parameters