User Manual

Remote Commands
R&S
®
FPL1000
863User Manual 1178.3370.02 ─ 09
CALCulate<n>:MARKer<m>:SGRam:Y:MINimum:NEXT
CALCulate<n>:MARKer<m>:SPECtrogram:Y:MINimum:NEXT
This command moves a marker vertically to the next higher minimum level for the cur-
rent frequency.
The search includes all frames. It does not change the horizontal position of the
marker.
Suffix:
<n>
.
Window
<m> Marker
Manual operation: See "Search Mode for Next Peak in Y-Direction" on page 358
CALCulate<n>:MARKer<m>:SGRam:Y:MINimum[:PEAK]
CALCulate<n>:MARKer<m>:SPECtrogram:Y:MINimum[:PEAK]
This command moves a marker vertically to the minimum level for the current fre-
quency.
The search includes all frames. It does not change the horizontal position of the
marker.
If the marker hasn't been active yet, the command first looks for the peak level for all
frequencies and moves the marker vertically to the minimum level.
Suffix:
<n>
.
Window
<m> Marker
Using Delta Markers
The following commands control spectrogram delta markers.
Useful commands for spectrogram markers described elsewhere
The following commands define the horizontal position of the delta markers.
●
CALCulate<n>:DELTamarker<m>:MAXimum:LEFT on page 854
●
CALCulate<n>:DELTamarker<m>:MAXimum:NEXT on page 855
●
CALCulate<n>:DELTamarker<m>:MAXimum[:PEAK] on page 855
●
CALCulate<n>:DELTamarker<m>:MAXimum:RIGHt on page 855
●
CALCulate<n>:DELTamarker<m>:MINimum:LEFT on page 856
●
CALCulate<n>:DELTamarker<m>:MINimum:NEXT on page 856
●
CALCulate<n>:DELTamarker<m>:MINimum[:PEAK] on page 856
●
CALCulate<n>:DELTamarker<m>:MINimum:RIGHt on page 856
Remote commands exclusive to spectrogram markers
CALCulate<n>:DELTamarker<m>:SGRam:FRAMe............................................................864
CALCulate<n>:DELTamarker<m>:SPECtrogram:FRAMe................................................... 864
Setting Basic Spectrum RF Measurement Parameters