User Manual

Remote Commands
R&S
®
FPL1000
870User Manual 1178.3370.02 ─ 09
<m> Marker
Parameters:
<State> ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
Example:
CALC:DELT:FUNC:FIX ON
Switches on the measurement with fixed reference value for all
delta markers.
CALC:DELT:FUNC:FIX:RPO:X 128 MHZ
Sets the frequency reference to 128 MHz.
CALC:DELT:FUNC:FIX:RPO:Y 30 DBM
Sets the reference level to +30 dBm.
Manual operation: See "Defining a Fixed Reference" on page 354
11.8.8.8 Marker Peak Lists
Useful commands for peak lists described elsewhere
●
CALCulate<n>:MARKer<m>:PEXCursion on page 847
●
MMEMory:STORe<n>:PEAK on page 942
●
Chapter 11.8.8.3, "Configuring and Performing a Marker Search", on page 847
Remote commands exclusive to peak lists
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:ANNotation:LABel[:STATe]......................... 870
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:COUNt?...................................................871
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks[:IMMediate].............................................. 871
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:LIST:SIZE.................................................872
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:SORT...................................................... 872
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:STATe......................................................872
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:X?........................................................... 873
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:Y?........................................................... 873
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:ANNotation:LABel[:STATe]
<State>
This command turns labels for peaks found during a peak search on and off.
The labels correspond to the marker number in the marker peak list.
Suffix:
<n>
.
Window
<m> Marker
Setting Basic Spectrum RF Measurement Parameters