User Manual

Remote Commands
R&S
®
FPL1000
875User Manual 1178.3370.02 ─ 09
Example:
CALC:MARK:FUNC:NOIS ON
Switches on the noise measurement.
Manual operation: See "Noise Measurement State" on page 367
See "Switching All Noise Measurement Off" on page 367
11.8.8.10 Phase Noise Measurement Marker
The following commands control the phase noise measurement marker function.
Useful commands for phase noise markers described elsewhere
●
CALCulate<n>:DELTamarker<m>:FUNCtion:FIXed:RPOint:MAXimum[:
PEAK]
●
CALCulate<n>:DELTamarker<m>:FUNCtion:FIXed:RPOint:X
●
CALCulate<n>:DELTamarker<m>:FUNCtion:FIXed:RPOint:Y
Remote commands exclusive to phase noise markers
CALCulate<n>:DELTamarker<m>:FUNCtion:PNOise:AUTO............................................... 875
CALCulate<n>:DELTamarker<m>:FUNCtion:PNOise:RESult?............................................ 875
CALCulate<n>:DELTamarker<m>:FUNCtion:PNOise[:STATe].............................................876
CALCulate<n>:MARKer<m>:FUNCtion:PNOise:AOFF.......................................................877
CALCulate<n>:MARKer<m>:FUNCtion:PNOise:RESult?................................................... 877
CALCulate<n>:MARKer<m>:FUNCtion:PNOise[:STATe].................................................... 877
CALCulate<n>:DELTamarker<m>:FUNCtion:PNOise:AUTO <State>
This command turns an automatic peak search for the fixed reference marker at the
end of a sweep on and off.
Suffix:
<n>
.
Window
<m> Marker
Parameters:
<State> ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
Example:
CALC:DELT:FUNC:PNO:AUTO ON
Activates an automatic peak search for the reference marker in
a phase-noise measurement.
Manual operation: See "Defining Reference Point" on page 370
CALCulate<n>:DELTamarker<m>:FUNCtion:PNOise:RESult?
This command queries the result of a phase noise measurement.
Setting Basic Spectrum RF Measurement Parameters