User Manual

Applications, Measurement Channels, and Result Displays
R&S
®
FPL1000
88User Manual 1178.3370.02 ─ 09
Using this overview, you can easily configure an entire channel setup from input over
processing to output and analysis by stepping through the dialog boxes as indicated.
See Chapter 7, "The Spectrum Application (RF Measurements)", on page 94 for
details on configuration.
6.6 Configuring Result Displays
Measurement results can be evaluated in many different ways, for example graphically,
as summary tables, statistical evaluations etc. Thus, the result display is highly config-
urable to suit your specific requirements and optimize analysis. Here you can find out
how to optimize the display for your measurement results.
General display settings that are usually configured during initial instrument setup,
independently of the current measurement, e.g. which items or colors are displayed on
the screen, are described in Chapter 9.2.1, "Display Settings", on page 502.
● Laying out the Result Display with the SmartGrid...................................................88
● Changing the Size of Windows............................................................................... 93
6.6.1 Laying out the Result Display with the SmartGrid
Measurement results can be evaluated in many different ways, for example graphically,
as summary tables, statistical evaluations etc. Each type of evaluation is displayed in a
separate window in the channel setup tab. Up to 16 individual windows can be dis-
played per channel setup (i.e. per tab). To arrange the diagrams and tables on the
screen, the Rohde & Schwarz SmartGrid function helps you find the target position
simply and quickly.
(For details on evaluation methods see Chapter 7.2.2, "Basic Evaluation Methods",
on page 117.)
Configuring Result Displays