User Manual

Remote Commands
R&S
®
FPL1000
900User Manual 1178.3370.02 ─ 09
Parameters:
<GeneratorLevel> Range: -60 to +10
*RST: line 1: -30 dBm, line 2: -20 dBm
Default unit: DBM
Example:
CALC:PLIN2 1dBm
Sets power line 2 to a level of 1 dBm.
Manual operation: See "Vertical Line <x>" on page 420
CALCulate<n>:PLINe<dl>:STATe <State>
This command turns a power line on and off
Suffix:
<n>
.
Window
<dl> 1 to 4
power line
Parameters:
<State> ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
Example:
CALC:PLIN2:STAT ON
Turns power line 2 on.
CALCulate<n>:TLINe<dl> <Time>
This command defines the position of a time line.
Suffix:
<n>
.
Window
<dl> 1 to 4
time line
Parameters:
<Time> Note that you can not set a time line to a position that is higher
than the current sweep time.
Range: 0 s to 1600 s
*RST: (STATe to OFF)
Default unit: S
Example:
CALC:TLIN 10ms
Sets the first time line to 10 ms.
Manual operation: See "Vertical Line <x>" on page 420
Setting Basic Spectrum RF Measurement Parameters