User Manual

Remote Commands
R&S
®
FPL1000
931User Manual 1178.3370.02 ─ 09
MMEMory:STORe<1|2>:TYPE <Type>
This command defines whether the data from the entire instrument or only from the
current channel setup is stored with the subsequent MMEM:STOR... command.
Suffix:
<1|2>
.
irrelevant
Parameters:
<Type> INSTrument | CHANnel
INSTrument
Stores data from the entire instrument.
CHANnel
Stores data from an individual channel setup.
*RST: INST
Example:
INST:SEL 'SPECTRUM2'
Selects channel setup'SPECTRUM2'.
MMEM:STOR:TYPE CHAN
Specifies that channel setup data is to be stored.
SYSTem:PRESet
This command presets the R&S FPL1000. It is identical to *RST.
Example:
SYST:PRES
Usage: Event
SYSTem:PRESet:CHANnel[:EXEC]
This command restores the default instrument settings in the current channel setup.
Use INST:SEL to select the channel setup.
For details see Chapter 8.1, "Restoring the Default Instrument Configuration (Preset)",
on page 456.
Example:
INST:SEL 'Spectrum2'
Selects the channel setup for "Spectrum2".
SYST:PRES:CHAN:EXEC
Restores the factory default settings to the "Spectrum2"channel
setup.
Usage: Event
Manual operation: See "Preset Channel Setup" on page 95
Managing Settings and Results