User Manual

Remote Commands
R&S
®
FPL1000
934User Manual 1178.3370.02 ─ 09
<ci> See table below
Example:
HCOP:CMAP:DEF2
Selects the optimized color set for the color settings of a print-
out.
Manual operation: See "Print Colors" on page 508
Gui setting Description Remote command
"Screen Colors (Print)" Selects the current screen colors for the
printout. The background is always printed in
white and the grid in black.
HCOP:CMAP:DEF1
"Optimized Colors" Selects an optimized color setting for the
printout to improve the visibility of the colors
(default setting). Trace 1 is blue, trace 2
black, trace 3 green, and the markers are
turquoise. The background is always printed
in white and the grid in black.
HCOP:CMAP:DEF2
"Screen Colors
(Screenshot)"
Selects the current screen colors without any
changes for a screenshot.
HCOP:CMAP:DEF4
HCOPy:DESTination<1|2> <arg0>
This command selects the destination of a print job.
Suffix:
<1|2>
.
Irrelevant.
Parameters:
<arg0> 'MMEM'
Sends the hardcopy to a file.
You can select the file name with MMEMory:NAME.
You can select the file format with HCOPy:DEVice:
LANGuage<1|2>.
'SYST:COMM:PRIN'
Sends the hardcopy to a printer.
You can select the printer with SYSTem:COMMunicate:
PRINter:SELect<1|2> .
'SYST:COMM:CLIP'
Sends the hardcopy to the clipboard.
The format should be WEMF.
*RST:
'SYST:COMM:CLIP'
Manual operation: See "Destination" on page 477
HCOPy:DEVice:COLor <State>
This command turns color printing on and off.
Parameters:
<State> ON | OFF | 0 | 1
Managing Settings and Results