User Manual

Remote Commands
R&S
®
FPL1000
937User Manual 1178.3370.02 ─ 09
HCOPy:PAGE:MARGin<1|2>:LEFT <arg0>
This command defines the margin at the left side of the printout page on which no ele-
ments are printed. The margins are defined according to HCOPy:PAGE:
MARGin<1|2>:UNIT on page 937.
Suffix:
<1|2>
.
1|2
Irrelevant.
Parameters:
<arg0> *RST: 4.23 mm
Example:
HCOP:PAGE:MARG2:LEFT 2
Manual operation: See "Margins" on page 480
HCOPy:PAGE:MARGin<1|2>:RIGHt
<arg0>
This command defines the margin at the right side of the printout page on which no
elements are printed. The margins are defined according to HCOPy:PAGE:
MARGin<1|2>:UNIT on page 937.
Suffix:
<1|2>
.
1|2
Irrelevant.
Parameters:
<arg0> *RST: 4.23 mm
Example:
HCOP:PAGE:MARG2:RIGH 2
Manual operation: See "Margins" on page 480
HCOPy:PAGE:MARGin<1|2>:TOP <arg0>
This command defines the margin at the top of the printout page on which no elements
are printed. The margins are defined according to HCOPy:PAGE:MARGin<1|2>:UNIT
on page 937.
Suffix:
<1|2>
.
1|2
Irrelevant.
Parameters:
<arg0> *RST: 4.23 mm
Example:
HCOP:PAGE:MARG2:TOP 2
Manual operation: See "Margins" on page 480
HCOPy:PAGE:MARGin<1|2>:UNIT <arg0>
This command defines the unit in which the margins for the printout page are config-
ured.
Managing Settings and Results