User Manual

Remote Commands
R&S
®
FPL1000
939User Manual 1178.3370.02 ─ 09
*RST: 1
Example:
HCOP:CONT WIND
HCOP:PAGE:WIND2:CHAN 'IQ Analyzer',0
HCOP:PAGE:WIND2:STAT 'IQ Analyzer','1',1
Prints only window 1 in the IQ Analyzer channel setup.
Manual operation: See "Print Multiple Windows" on page 473
HCOPy:PAGE:WINDow<1|2>:COUNt <arg0>
This command defines how many windows are displayed on a single page of the print-
out for HCOPy:CONTent on page 933.
Suffix:
<1|2>
.
irrelevant
Parameters:
<arg0> integer
*RST: 1
Example:
HCOP:PAGE:WIND2:COUN 2
Manual operation: See "Windows Per Page" on page 479
HCOPy:PAGE:WINDow<1|2>:SCALe <arg0>
This command determines the scaling of the windows in the printout for HCOPy:
CONTent on page 933.
Suffix:
<1|2>
.
irrelevant
Parameters:
<arg0> 1 | 0 | ON | OFF
1 | ON
Each window is scaled to fit the page size optimally, not regard-
ing the aspect ratio of the original display. If more than one win-
dow is printed on one page (see HCOPy:PAGE:WINDow<1|2>:
COUNt on page 939), each window is printed in equal size.
("Size to fit")
0 | OFF
Each window is printed as large as possible while maintaining
the aspect ratio of the original display.
("Maintain aspect ratio")
*RST:
1
Example:
HCOP:PAGE:WIND2:SCAL 0
Manual operation: See "Scaling" on page 480
Managing Settings and Results