User Manual

Remote Commands
R&S
®
FPL1000
941User Manual 1178.3370.02 ─ 09
To query the name of other installed printers, use SYSTem:COMMunicate:PRINter:
ENUMerate[:NEXT] on page 941.
Manual operation: See "Printer Name" on page 478
SYSTem:COMMunicate:PRINter:ENUMerate[:NEXT]
This command queries the name of available printers.
You have to use SYSTem:COMMunicate:PRINter:ENUMerate:FIRSt on page 940
for this command to work properly.
Manual operation: See "Printer Name" on page 478
SYSTem:COMMunicate:PRINter:SELect<1|2> <arg0>
This command selects the printer that processes jobs sent by the R&S FPL1000.
Use HCOPy:DESTination<1|2> to select another output destination.
Suffix:
<1|2>
.
1|2
Irrelevant.
Parameters:
<arg0> String containing the printer name.
Use
•SYSTem:COMMunicate:PRINter:ENUMerate:FIRSt
on page 940and
•SYSTem:COMMunicate:PRINter:ENUMerate[:NEXT]
on page 941
to query all available printers.
*RST: NONE
Manual operation: See "Printer Name" on page 478
11.9.5 Storing Measurement Results
The following commands can be used to store the results of a measurement.
Useful commands for storing results described elsewhere:
●
FORMat[:DATA] on page 831
Remote commands exclusive to storing results:
FORMat:DEXPort:HEADer..............................................................................................942
MMEMory:STORe<n>:LIST.............................................................................................942
MMEMory:STORe<n>:PEAK...........................................................................................942
MMEMory:STORe<n>:SGRam........................................................................................942
MMEMory:STORe<n>:SPECtrogram............................................................................... 942
MMEMory:STORe<n>:SPURious.................................................................................... 943
Managing Settings and Results