User Manual

Remote Commands
R&S
®
FPL1000
942User Manual 1178.3370.02 ─ 09
FORMat:DEXPort:HEADer <State>
If enabled, additional instrument and measurement settings are included in the header
of the export file for result data. If disabled, only the pure result data from the selected
traces and tables is exported.
See Chapter 7.13.6, "Reference: ASCII File Export Format", on page 451 for details.
Parameters:
<State> ON | OFF | 0 | 1
*RST: 1
Manual operation: See "Include Instrument & Measurement Settings" on page 447
MMEMory:STORe<n>:LIST <FileName>
This command exports the SEM and spurious emission list evaluation to a file.
The file format is *.dat.
Suffix:
<n>
.
Window
Parameters:
<FileName> String containing the path and name of the target file.
Example:
MMEM:STOR:LIST 'test'
Stores the current list evaluation results in the test.dat file.
Manual operation: See "Saving the Result Summary (Evaluation List) to a File"
on page 187
See "Save Evaluation List" on page 209
MMEMory:STORe<n>:PEAK <FileName>
This command exports the marker peak list to a file.
Suffix:
<n>
.
Window
Parameters:
<FileName> String containing the path,name and extension of the target file.
Example:
MMEM:STOR:PEAK 'test.dat'
Saves the current marker peak list in the file test.dat.
Manual operation: See "Export Peak List" on page 382
MMEMory:STORe<n>:SGRam <FileName>
MMEMory:STORe<n>:SPECtrogram <FileName>
This command exports spectrogram data to an ASCII file.
The file contains the data for every frame in the history buffer. The data corresponding
to a particular frame begins with information about the frame number and the time that
frame was recorded.
Managing Settings and Results