Manualshelf

User Manual

ManualsBrandsRohde & Schwarz ManualsSignal Generators & Spectrum AnalysersSpectrum Analyser Portable, 3GHz, 50Ohm
941942943944945946947948949950
Remote Commands
R&S
®
FPL1000
944User Manual 1178.3370.02 ─ 09
HCOPy:TREPort:PAGesize.............................................................................................950
HCOPy:TREPort:PAGecount:STATe.................................................................................951
HCOPy:TREPort:PCOLors[:STATe]..................................................................................951
HCOPy:TREPort:TDSTamp[:STATe].................................................................................951
HCOPy:TREPort:TEST:REMove......................................................................................951
HCOPy:TREPort:TEST:REMove:ALL............................................................................... 952
HCOPy:TREPort:TITLe...................................................................................................952
HCOPy:TREPort:TITLe:STATe........................................................................................ 953
HCOPy:MODE <Mode>
Selects the output of the HCOPy[:IMMediate<1|2>] command.
Parameters:
<Mode> SCReen
HCOPy:IMMediate prints the current screen contents.
REPort
HCOPy:IMMediate generates a measurement report.
*RST: SCReen
Example:
HCOP:MODE REPort
HCOP
Creates a file containing the measurement report.
Manual operation: See "Save" on page 498
HCOPy:TREPort:APPend
This command adds the current measurement results to the test report.
The saved data depends on the items you have selected with HCOPy:TREPort:
ITEM:SELect on page 948.
Example:
Perform a measurement, then:
HCOP:TREP:NEW
Creates a new test report with the results of the first measure-
ment.
Perform another measurement, then:
HCOP:TREP:APP
Adds the results of the second measurement to the test report.
Usage: Event
Manual operation:
See " Report Append" on page 497
HCOPy:TREPort:DESCription <Description>
This command defines the description of the test report as shown on its title page.
Parameters:
<Description> String containing the description of the test report.
Managing Settings and Results