User Manual

ManualsBrandsRohde & Schwarz ManualsSignal Generators & Spectrum AnalysersSpectrum Analyser Portable, 3GHz, 50Ohm

951

952

953

954

955

956

957

958

959

960

Remote Commands

R&S

FPL1000

959User Manual 1178.3370.02 ─ 09

[SENSe:]CORRection:TRANsducer:DATA........................................................................ 960

[SENSe:]CORRection:TRANsducer:DELete......................................................................960

[SENSe:]CORRection:TRANsducer:SCALing....................................................................960

[SENSe:]CORRection:TRANsducer:SELect......................................................................961

[SENSe:]CORRection:TRANsducer[:STATe]..................................................................... 961

[SENSe:]CORRection:TRANsducer:UNIT.........................................................................961

MMEMory:LOAD<n>:TFACtor......................................................................................... 962

MMEMory:STORe<n>:TFACtor....................................................................................... 962

[SENSe:]CORRection:TRANsducer:ADJust:RLEVel[:STATe] <State>

This command turns an automatic adjustment of the reference level to the transducer

on and off.

Before you can use the command, you have to select and turn on a transducer.

Parameters:

<State> ON | OFF | 1 | 0

*RST: 0

Manual operation: See "Adjust Ref Level" on page 527

[SENSe:]CORRection:TRANsducer:CATalog?

This command queries all transducer factors stored on the R&S FPL1000.

After general data for the transducer storage directory, data for the individual files is lis-

ted.

The result is a comma-separated list of values with the following syntax:

<UsedMem>,<FreeMem>,<FileSize>,<FileName>[,<FileSize>,<FileName>]

Return values:

<UsedDiskSpace> numeric value in bytes

Amount of storage space required by all transducers files in the

C:\ProgramData\Rohde-Schwarz\ZNL-FPL\trd directory

(= sum of all individual <FileSize> values)

<FreeDiskSpace> numeric value in bytes

Amount of free storage space on the R&S FPL1000

<FileSize> numeric value in bytes

Size of a single transducer file

<FileName> string

Name of a single transducer file

Example:

SENSE:CORR:TRAN:CAT?

//Result: 2743,2312620544,720,'FactorGSM.TDF',2023,'FactorBTS.TDF'

Usage: Query only

Configuring the R&S FPL1000