User Manual

Remote Commands
R&S
®
FPL1000
963User Manual 1178.3370.02 ─ 09
11.10.4.1 General Display Settings and Items
The following commands add, remove or customize general display and screen ele-
ments.
Useful commands for general display settings described elsewhere
●
DISPlay[:WINDow<n>]:MTABle on page 846
Remote commands exclusive to general display settings
DISPlay:ANNotation:CBAR............................................................................................. 963
DISPlay:BLIGhting......................................................................................................... 963
DISPlay:ANNotation:FREQuency.....................................................................................963
DISPlay:SBAR[:STATe]...................................................................................................964
DISPlay:SKEYs[:STATe]................................................................................................. 964
DISPlay:TBAR[:STATe]...................................................................................................964
DISPlay:TOUChscreen[:STATe]....................................................................................... 964
DISPlay[:WINDow<n>]:TIME...........................................................................................965
DISPlay[:WINDow<n>]:TIME:FORMat..............................................................................965
SYSTem:DISPlay:FPANel[:STATe]................................................................................... 965
DISPlay:ANNotation:CBAR <State>
This command hides or displays the channel bar information.
Parameters:
<State> ON | OFF | 0 | 1
*RST: 1
Example:
DISP:ANN:CBAR OFF
Manual operation: See "Channel Bar" on page 505
DISPlay:BLIGhting <Brightness>
Changes the brightness of the display in eight steps.
Parameters:
<Brightness> integer
Range: 0 to 7
*RST: 3
Example:
DISP:BLIG 3
Reduces the brightness of the display.
Manual operation: See "Background Lighting" on page 503
DISPlay:ANNotation:FREQuency <State>
This command turns the label of the x-axis on and off.
Configuring the R&S
FPL1000