User Manual

ManualsBrandsRohde & Schwarz ManualsSignal Generators & Spectrum AnalysersSpectrum Analyser Portable, 3GHz, 50Ohm

971

972

973

974

975

976

977

978

979

980

Remote Commands

R&S

FPL1000

971User Manual 1178.3370.02 ─ 09

SYSTem:LXI:LANReset

This command resets the LAN configuration as required by the LXI standard. The com-

mand also resets the LXI password and instrument description.

Manual operation: See "LAN Reset" on page 588

SYSTem:LXI:MDEScription <Description>

This command defines the LXI instrument description.

Parameters:

<Description> String containing the instrument description.

Manual operation: See "LXI Manufacturer Description" on page 588

SYSTem:LXI:PASSword

This command defines the LXI password.

Parameters:

<Password> String containing the password.

Return values:

<Password> The query returns the current password.

Manual operation: See "LXI Password" on page 587

SYSTem:REVision:FACTory

Resets the response to the REV? query to the factory default value.

Usage:

Event

Manual operation: See "Resetting the Factory Revision" on page 586

11.10.7 Checking the System Configuration

The following commands are required to check the system configuration on the

R&S FPL1000.

Useful commands for obtaining system information described elsewhere:

●

DIAGnostic:SERVice:SINFo? on page 976

Remote commands exclusive to obtaining system information:

DIAGnostic:SERVice:BATTery:LEVel?..............................................................................972

DIAGnostic:SERVice:BIOSinfo?...................................................................................... 972

DIAGnostic:SERVice:HWINfo?........................................................................................ 972

DIAGnostic:SERVice:VERSinfo?..................................................................................... 973

SYSTem:ERRor:CLEar:ALL............................................................................................ 973

SYSTem:ERRor:CLEar:REMote...................................................................................... 973

SYSTem:ERRor:EXTended?........................................................................................... 973

Configuring the R&S

FPL1000