User Manual

Remote Commands
R&S
®
FPL1000
977User Manual 1178.3370.02 ─ 09
Manual operation: See "Create R&S Support Information" on page 518
SYSTem:PASSword[:CENable] <arg0>
Provides a password for subsequent service functions.
Parameters:
<arg0> string
Example:
SYST:PASS:CEN '894129'
Manual operation: See "Password" on page 522
SYSTem:PASSword:RESet
Clears any previously provided password and returns to the most restrictive service
level.
Manual operation:
See "Password" on page 522
11.11 Emulating Other Instruments' Commands
The R&S FPL1000 analyzer family supports a subset of the GPIB commands of sev-
eral HP and PSA instruments.
For details see Chapter 10.2, "GPIB Languages", on page 577.
● Setting up Instrument Emulation...........................................................................977
● Reference: GPIB Commands of Emulated HP Models.........................................980
● Reference: Command Set of Emulated CXA/EXA Models................................. 1007
11.11.1 Setting up Instrument Emulation
The following commands are required to set up the use of commands to emulate other
instruments.
Useful commands for emulating other instruments described elsewhere:
●
SYSTem:REVision:FACTory on page 971
Remote commands exclusive to emulating other instruments:
SYSTem:HPCoupling..................................................................................................... 977
SYSTem:IFGain:MODE.................................................................................................. 978
SYSTem:LANGuage.......................................................................................................978
SYSTem:PSA:WIDeband................................................................................................ 978
SYSTem:REVision[:STRing]............................................................................................979
SYSTem:RSWeep..........................................................................................................979
SYSTem:HPCoupling <CouplingType>
Controls the default coupling ratios in the HP emulation mode for:
Emulating Other Instruments' Commands