User Manual

Remote Commands
R&S
®
FPL1000
978User Manual 1178.3370.02 ─ 09
●
span and resolution bandwidth (Span/RBW) and
●
resolution bandwidth and video bandwidth (RBW/VBW)
This command is only available if a HP language is selected using SYSTem:LANGuage
on page 978.
Parameters:
<CouplingType> HP | FSP
*RST: FSP
Example:
SYSTem:HPC HP
Manual operation: See "Coupling" on page 586
SYSTem:IFGain:MODE <Mode>
Configures the internal IF gain settings in HP emulation mode due to the application
needs. This setting is only taken into account for resolution bandwidth < 300 kHz and is
only available if a HP language is selected using SYSTem:LANGuage on page 978.
Parameters:
<Mode> NORMal | PULSe
NORMal
Optimized for high dynamic range, overload limit is close to ref-
erence level.
PULSe
Optimized for pulsed signals, overload limit up to 10 dB above
reference level.
*RST: NORM
Example:
SYST:IFG:MODE PULS
Manual operation: See "IF Gain" on page 585
SYSTem:LANGuage <Language>
This command selects the system language.
Example:
SYST:LANG 'PSA'
Emulates the PSA.
Manual operation: See "Language" on page 585
SYSTem:PSA:WIDeband <State>
This command defines which option is returned when the *OPT? query is executed,
depending on the state of the wideband option.
It is only available for PSA89600 emulation.
Parameters:
<State> ON | OFF | HIGH
Emulating Other Instruments' Commands