User Manual

Preparing for Use
R&S
®
FPL1000
28Getting Started 1323.1602.02 ─ 03
Screen resolution and format
The touchscreen of the R&S FPL1000 is calibrated for a 16:10 format. If
you connect a monitor or projector using a different format (e.g. 4:3), the
calibration will not be correct and the screen will not react to your touch
actions properly.
The touchscreen has a screen resolution of 1280x800 pixels. Most external
monitors have a higher screen resolution. If the screen resolution of the
monitor is set higher than the instrument's resolution, the application win-
dow uses an area of 1280x800 pixels on the monitor display. For full screen
display, adjust the monitor's screen resolution.
The R&S FPL1000 supports a minimum resolution of 1280x768 pixels.
1. Connect the external monitor to the R&S FPL1000.
2. Press the SETUP key.
3. Press the "Display" softkey.
4. Select the "Configure Monitor" tab in the "Display" dialog box.
The standard Windows "Screen Resolution" dialog box is displayed.
5. If necessary, change the screen resolution to be used. Consider the informa-
tion in the note above.
Connecting an External Monitor