User Manual

Common Instrument Functions
R&S
®
FPL1000
105User Manual 1178.3370.02 ─ 03
Comment
An optional description for the data file. A maximum of 60 characters can be displayed.
Remote command:
MMEMory:COMMent on page 788
File Type
Determines whether the global instrument settings with all "Channel" s are stored or
recalled, or the current "Channel" settings only.
Items:
Defines which data and settings are stored or are recalled. Depending on the "File
Type" , either channel setups only, or global settings are available. Which items are
available also depends on the installed options (see also "Stored Data Types"
on page 102).
Remote command:
MMEMory:SELect[:ITEM]:ALL on page 793
MMEMory:SELect[:ITEM]:DEFault on page 793
MMEMory:SELect[:ITEM]:NONE on page 794
MMEMory:SELect[:ITEM]:HWSettings on page 793
MMEMory:SELect[:ITEM]:LINes:ALL on page 794
MMEMory:SELect[:ITEM]:SGRam on page 794
MMEMory:SELect[:ITEM]:TRACe[:ACTive] on page 795
MMEMory:SELect[:ITEM]:TRANsducer:ALL on page 795
Save File
Saves the settings file with the defined filename.
Remote command:
MMEMory:STORe<n>:STATe on page 797
MMEMory:STORe<n>:STATe:NEXT on page 798
Recall in New Channel / Recall in Current Channel
Restores the instrument settings as saved in the selected settings file. If the settings
file contains settings for a specific "Channel" only, select "Recall in New Channel" to
activate a new channel setup with the stored settings. Select "Recall in Current Chan-
nel" to replace the current "Channel" settings.
Note: After you use the "Recall" function, the history of previous actions is deleted, i.e.
any actions performed previously cannot be undone or redone using the UNDO/REDO
keys.
Note: If a channel setup with the same name as the "Channel" to be restored (in a new
"Channel" ) is already active, the name for the new channel setup is extended by a
consecutive number:
In remote commands, you must append this number to the channel setup name, as
well.
Remote command:
MMEMory:LOAD:STATe on page 796
Data Management