User Manual

Common Instrument Functions
R&S
®
FPL1000
136User Manual 1178.3370.02 ─ 03
► Select the language from the list of available languages.
The software-defined interface elements (such as softkeys, dialog boxes, diagram
texts etc.) are displayed in the selected language.
Remote command:
SYSTem:DISPlay:LANGuage on page 830
6.3.4 System Configuration Settings
Access: SETUP > "System Configuration"
● Hardware Information............................................................................................136
● Information on Versions and Options....................................................................136
● System Messages.................................................................................................138
● Firmware Updates.................................................................................................139
● General Configuration Settings.............................................................................141
● Additional Interfaces..............................................................................................141
6.3.4.1 Hardware Information
Access: SETUP > "System Configuration" > "Hardware Info"
An overview of the installed hardware in your R&S FPL1000 is provided.
Every listed component is described by its serial number, order number, model infor-
mation, hardware code, and hardware revision.
This information can be useful when problems occur with the instrument and you
require support from Rohde & Schwarz.
Remote command:
DIAGnostic:SERVice:HWINfo? on page 835
6.3.4.2 Information on Versions and Options
Access: SETUP > "System Configuration" > "Versions + Options"
General Instrument Setup