User Manual

Common Instrument Functions
R&S
®
FPL1000
137User Manual 1178.3370.02 ─ 03
Information on the firmware version and options installed on your instrument is provi-
ded. The unique Rohde & Schwarz device ID is also indicated here, as it is required for
license and option administration.
You can also install new firmware options in this dialog box.
The table also contains:
●
The open source acknowledgements (PDF file) for the firmware and other software
packages used by the R&S FPL1000
●
The European License Agreement (EULA) for LucasFonts RSCorpid
Expired option licenses
If an option is about to expire, a message box is displayed to inform you. You can then
use the "Install Option" function to enter a new license key.
If an option has already expired, a message box appears for you to confirm. In this
case, all instrument functions are unavailable (including remote control) until the
R&S FPL1000 is rebooted. You must then use the "Install Option" function to enter the
new license key.
For details on options refer to the "Getting Started" manual, "Checking the Supplied
Items".
Remote commands:
SYSTem:FORMat:IDENt on page 838
DIAGnostic:SERVice:BIOSinfo? on page 835
DIAGnostic:SERVice:VERSinfo? on page 836
General Instrument Setup