User Manual

Common Instrument Functions
R&S
®
FPL1000
140User Manual 1178.3370.02 ─ 03
Enter the name or browse for the firmware installation file and press the "Install" but-
ton.
Remote command:
SYSTem:FIRMware:UPDate on page 838
How to Update the Instrument Firmware
1. Download the update package from the Rohde&Schwarz website and store it on a
memory stick, on the instrument, or on a server network drive that can be accessed
by the instrument.
2.
NOTICE! Stop measurement. The firmware update must not be performed during a
running measurement.
If a measurement is running, stop it by pressing the highlighted RUN CONT or
RUN SINGLE key.
3. Select the SETUP key.
4. Select the "System Config" softkey.
5. Select the "Firmware Update" tab.
6. In the file selection dialog box select the FPLSetup*.exe file.
7. Select "Install" to start the update.
8. After the firmware update, the R&S FPL1000 reboots automatically.
9. Depending on the previous firmware version, a reconfiguration of the hardware
might be required during the first startup of the firmware. The reconfiguration starts
General Instrument Setup