User Manual

Common Instrument Functions
R&S
®
FPL1000
143User Manual 1178.3370.02 ─ 03
Create R&S Support Information ............................................................................... 143
Save Device Footprint ................................................................................................143
Create R&S Support Information
Creates a *.zip file with important support information. The *.zip file contains the sys-
tem configuration information ( "Device Footprint" ), the current eeprom data and a
screenshot of the screen display.
This data is stored to the C:\Users\Public\Documents\Rohde-Schwarz\Analyzer direc-
tory on the instrument.
The file name consists of the unique device ID and the current date and time of the file
creation.
If you contact the Rohde&Schwarz support to get help for a certain problem, send
these files to the support in order to identify and solve the problem faster.
Remote command:
DIAGnostic:SERVice:SINFo? on page 840
Save Device Footprint
Creates an *.xml file with information on installed hardware, software, image and
FPGA versions. The *.xml file is stored under
C:\ProgramData\Rohde-Schwarz\ZNL-FPL\devicedata\xml\ on the instru-
ment. It is also included in the service.zip file.
6.3.5.2 Self-test Settings and Results
Access: SETUP > "Service" > "Selftest"
If the R&S FPL1000 fails you can perform a self-test of the instrument to identify any
defective modules.
General Instrument Setup