User Manual

Common Instrument Functions
R&S
®
FPL1000
149User Manual 1178.3370.02 ─ 03
Up to 8 transducer lines can be activated simultaneously in the R&S FPL1000. Many
more can be stored on the instrument.
Stored transducer settings
When storing and recalling transducer settings, consider the information provided in
"Saving and recalling transducer and limit line settings" on page 100.
● Transducer Management......................................................................................149
● Transducer Factors...............................................................................................151
Transducer Management
Access: SETUP > "Transducer"
The settings required to manage all transducer lines on the instrument are described
here.
For the transducer line overview, the R&S FPL1000 searches for all stored transducer
lines with the file extension .TDF in the
C:\ProgramData\Rohde-Schwarz\ZNL-FPL\trd directory. The overview allows
you to determine which transducer lines are available and can be used for the current
measurement.
For details on settings for individual lines see "Transducer Factors" on page 151.
For instructions on configuring and working with transducers see Chapter 6.3.6.4,
"How to Configure the Transducer", on page 155.
General Instrument Setup