User Manual

Common Instrument Functions
R&S
®
FPL1000
151User Manual 1178.3370.02 ─ 03
Adjust Ref Level
Activates or deactivates the automatic adjustment of the reference level to the selected
transducer factor.
"Auto"
Activates the automatic adjustment. The original dynamic range is
restored by shifting the reference level by the maximum transducer
factor.
"Manual"
Deactivates the automatic adjustment. Adjust the reference level via
the "Amplitude" menu.
Remote command:
[SENSe:]CORRection:TRANsducer:ADJust:RLEVel[:STATe] on page 820
Create New Line
Create a new transducer line.
Remote command:
[SENSe:]CORRection:TRANsducer:SELect on page 822
Edit Line
Edit an existing transducer line configuration.
Copy Line
Copy the selected transducer line configuration to create a new line.
Delete Line
Delete the selected transducer line.
Remote command:
[SENSe:]CORRection:TRANsducer:DELete on page 821
Transducer Factors
Access: SETUP > "Transducer" > "Edit Line" / "Copy Line" / "New Line"
The settings and functions available for individual transducer lines are described here.
For instructions on creating and editing transducer lines see Chapter 6.3.6.4, "How to
Configure the Transducer", on page 155.
General Instrument Setup