User Manual
Common Instrument Functions
R&S
®
FPL1000
154User Manual 1178.3370.02 ─ 03
Import
Opens a file selection dialog box and loads the transducer factor from the selected file
in .CSV format.
Note that a valid import file must contain a minimum of required information for the
R&S FPL1000. For details on the file format see Chapter 6.3.6.3, "Reference: Trans-
ducer Factor File Format", on page 154.
Remote command:
MMEMory:LOAD<n>:TFACtor on page 823
Export
Opens a file selection dialog box and stores the currently displayed transducer factor to
the defined file in .CSV format.
For details on the file format see Chapter 6.3.6.3, "Reference: Transducer Factor File
Format", on page 154.
The transducer factor can be imported again later by the R&S FPL1000 for use in other
measurements.
Remote command:
MMEMory:STORe<n>:TFACtor on page 823
6.3.6.3 Reference: Transducer Factor File Format
Transducer factor data can be exported to a file in ASCII (CSV) format for further eval-
uation in other applications. Transducer factors stored in the specified ASCII (CSV) for-
mat can also be imported to the R&S FPL1000 for other measurements (see " Import "
on page 154). This reference describes in detail the format of the export/import files for
transducer factors. Note that the bold data is mandatory, all other data is optional.
Different language versions of evaluation programs may require a different handling of
the decimal point. Thus, you can define the decimal separator to be used (see " Deci-
mal Separator " on page 514).
Table 6-2: ASCII file format for transducer factor files
File contents Description
Header data
sep=; Separator for individual values (required by Microsoft Excel, for
example)
Type;RS_TransducerFactor; Type of data
FileFormatVersion;1.00; File format version
Date;01.Oct 2006; Date of data set storage
OptionID;SpectrumAnalyzer Application the transducer factor was created for
Name;TestTDF1 Transducer factor name
Comment;Transducer for device A Description of transducer factor
XAxisScaling;LINEAR Scaling of x-axis linear (LIN) or logarithmic (LOG)
YAxisUnit;LEVEL_DB Unit of y values
General Instrument Setup