User Manual

Common Instrument Functions
R&S
®
FPL1000
155User Manual 1178.3370.02 ─ 03
File contents Description
YAxisScaleMode;ABSOLUTE Scaling of y-axis (absolute or relative)
NoOfPoints;5 Number of points the line is defined by
Data section for individual data points
100000000;-50.000000 x- and y-values of each data point defining the line
500000000;-30.000000
1000000000;0.000000
1500000000;-30.000000
2500000000;-50.000000
6.3.6.4 How to Configure the Transducer
Configuring the transducer is very similar to configuring transducer factors.
The transducer settings are defined in the "Transducer" dialog box which is displayed
when you press the SETUP key and then select "Transducer" .
Stored transducer settings
When storing and recalling transducer settings, consider the information provided in
"Saving and recalling transducer and limit line settings" on page 100.
The following tasks are described:
●
"How to find compatible transducer lines" on page 155
●
"How to activate and deactivate a transducer" on page 155
●
"How to edit existing transducer lines" on page 156
●
"How to copy an existing transducer line" on page 156
●
"How to delete an existing transducer line" on page 156
●
"How to configure a new transducer line" on page 157
●
"How to move the transducer line vertically or horizontally" on page 157
How to find compatible transducer lines
► In the "Transducer" dialog box, select the "View Filter" option: "Show Compatible" .
All transducer lines stored on the instrument that are compatible to the current
measurement settings are displayed in the overview.
How to activate and deactivate a transducer
1. To activate a transducer select a transducer line in the overview and select the
"Active" setting for it.
The trace is automatically recalculated for the next sweep after a transducer line is
activated.
General Instrument Setup